High precision toploading weighing balances

PAGES ON THE GX 1 2 3 4 5 6 7 8 9 Flash Presentation
The GX-Series - features internal calibration, while the GF does not

Milligram accuracy
GF-200/300/400/600 come standard
with plastic draft shield.

GF-Series	GF-200/300/400/600	200/300/400/600g x 0.001g
	GF-2000/3000/4000/6100	2000/3000/4000/6100g x 0.01g
	GF-6000/8000	6000/8000g x 0.1g

The GF-Series offers all the spectacular features of the GX-Series except the internal motorized calibration feature has been removed. Therefore, if you click on pages in the nav box above page 4 (accessories), 5 (display), 6 (features), 7 (ip-65 rating), 8 (detail about the sensor), or page 9 (SHS technology) it's the same for the GF-Series as the GX-Series except there is no internal calibration mass.

ISO 9000 procedures favor the calibration of balances with an external certified calibration mass. A balance with internal motorized calibration weight is a nice feature, but costly. Most balances with the internal calibration feature also offer external calibration. External calibration is vital since it is much more convenient to send out the external calibration mass for recalibration/certification verses the costly fee of having the internal calibration mass removed from the balance and sent out for re-calibration.

In addition, if you own several of the same balances just one external traceable calibration is needed for ISO compliance.

Precision Weighing Balances always recommends that you purchase the calibration mass with any balance you select. This allows you to calibrate the unit yourself without requiring the services of an outside calibration firm. Best of all calibration couldn't be simpler. Connect the AC adapter and warm up the balance with nothing on the weighing pan. Then simply turn "ON" the balance, allow the balance to go through the power-up routine and then press and hold the "CAL" until "CALout" is displayed. The display walks you through the cal procedure in less than 1 minute. The entire cal is controlled by the user-friendly keypad. The days of opening the balance and tweaking those potentiometers and trim resistors to calibrate a scale are gone with the advent of the digital circuit and EPROM technology first implemented by A&D Engineer's.

All A&D GR-Series come standard with built-in RS-232c and A&D WinCT balance communication software on CD-Rom to interface your balance with your computer.


A&D Model:		GF-200	GF-300	GF-400	GF-600	GF-1200	GF-2000
M.S.R.P:		$1149.00	$1285.00	$1515.00	$2040.00	$1099.00	$1149.00
PWB Discounted Price		$884.73	$989.45	$1166.55	$1570.80	$846.23	$884.73
Weighing Capacity		210 g	310 g	410 g	610 g	1210 g	2100 g
Minimum weighing value		0.001g				0.01g
Repeatability/Std. Dev.		0.001 g				0.01g
Linearity		± 0.002 g				± 0.02 g
Tare Range		To capacity by subtraction
Stabilization time (typical at FAST)		Approximately 1 second. Review the test data on response time
Sensitivity Drift		± 2ppm / °C(When automatic self calibration is not used)
Weigh Modes		g, oz, lb, lb:oz, ozt, ct, mm, dwt, GN, TL, t, MS, PC, %, and DS NOTE - the GF-400, GF-600 does not have the lb:oz weigh mode
Operating Temperature		5°C~40°C / 41°F~104°F RH less than 85%
Sensing Method		Super Hybrid Sensor (SHS)
Display Type		Vacuum Florescent Display (VFD)
Display Refresh		5 times/s, 10 times/s or automatic (Selectable)
Pan Size		128 x 128 mm / 5 x 5 inches				165 x 165 mm / 6.5 x 6.5 inches
Counting mode	Min unit mass	0.001 g				0.01 g
	Number of sample	10, 25, 50 or 100 pieces
Percent mode	Min 100% reference mass	0.100 g				1.00 g
	Min 100% display	0.01%, 0.1%, 1% (Depends on the reference mass stored)
Breeze Break Dimensions	mm	Internal: 145(W) x 145 (D) x 90(H) mm *				Internal: 163(W) x 195 (D) x 208(H) mm (with optional GX-11 Glass Breeze Break)
	inch	Internal: 5.7(W) x 5.7(D) x 3.6(H) in *				Internal: 6.4(W) x 7.7(D) x 8.2(H) in (with optional GX-11 Glass Breeze Break)
Optional $200 NTEP Version Available		YES	YES	NO	NO	YES	YES
Standard Interface		RS-232c with Windows Communication Tool (WinCT)
External calibration weights (optional cal mass for external only)		200g 100g	300g 200g 100g	400g 300g 200g	600g 500g 400g	1000g 500g	2000g 1000g
Calibration		Calibration requires the purchase of one of the masses listed above for the specific model. The GF Series like many of the other A&D balances offers the ability to select different masses that best meets your weighing application for calibration. To learn more about the selectable calibration setting click here. We also offer a large selection of calibration masses here. If you prefer internal motorized calibration see the GX-Series.
External Dimensions		210(W) x 317(D) x 86(H)
Power (AC Adapter )		100, 120, 220, 240 VAC (AC adapter) 50/60 Hz All balances shipped with 120V AC Adapter. Other voltages add $25.00
Net Weight (Approx.)		3.8 kg / 8.4 lb				4.3 kg / 9.6 lb
Standard Accessories		Manual, AC Adapter, WinCT
Optional Accessories		RS-232C Cable, SW-128 Foot Switch, Density Determination Kit, Cover, All Glass Draft Shield, Printer
Comparable models		Competitive Models for the GF-200	Competitive Models for the GF-300	Competitive Models for the GF-400	Competitive Models for the GF-600	Competitive Models for the GF-1200	Competitive Models for the GF-2000
Download the GF Series Instruction Manual (1.94 MB) now You need Adobe Acrobat Reader to view. The instruction manual contains detail information regarding calibration, additional features and keypad functions. Download the manual for the Density Determination Kit (808KB), Comparator or Analog Output (1.22MB).
** Specifications subject to change without notice			* GF-200/300/400/600 come standard with plastic breeze break or can be purchased with optional GX-10 Glass Breeze break

See the rest of the GF-Series Here